Labelle 3th Portable Ultrasonic Skin Scrubber w/ Skin peeling & Iontophoresis + international multi-

Labelle 3th Portable Ultrasonic Skin Scrubber w/ Skin peeling & Iontophoresis + international multi-


Before Operation

※ Recharge

1. Turns off after the recharge sound [beep-beep-beep]. Must recharge and use.

2. Use the recharge adapter supplied with the product [Outlet part: AC 110~220V/50~60Hz, Product connection: 5V DC]

Properly charging when display box [refer to picture].

3. will turn on and off after maximum of 4 hours of recharge.

How to use

Before using – Use lightly for the first use [Within 1Min],
extensive use can cause pigmentation or skin irritation.
Peeling

1. Remove makeup and cleanse face.
2. If possible moist the corneous layer with a steam towel or facial steamer. [Optional]
3. Apply warm water or beauty water with makeup cotton around the skin-care area.
4. Operate by pushing the button. [Maximum 5 minute operation.]
5. Start peeling by operating the blade as in the picture above. [About 2-3 minutes]
6. Constantly apply warm water or beauty water during operation.
7. When finished turn off the product and wash face or wipe with cold towel.
– First start once a week and gradually 2-3 times a week.
– Effective during a foot bath or a half bath.
Iontophoresis

1. Nutrient Supply for whitening and moisture care.
2. Apply iontophoresis makeup or nutrient makeup.
3. Push the power button twice to start the iontophoresis function.
4. Operate by gently pulling the blade as in the picture above.
[Press areas where pulling is difficult or makeup applied areas.]
5. Finish by applying skin lotion and turn off the product.
※ When using cosmetics use 2-3 times a week.




  • 0
     
     

    Discuss or Comment